To add music to a PowerPoint slide, open the slide, choose Insert → Audio → Audio on My PC (on a Mac, Audio from File), pick the song and set how it starts on the Playback tab. To keep the same song playing through the whole presentation, select the speaker icon and press Play in Background.
That is the short version. The rest of this guide covers the settings that decide whether the music plays on one slide or all of them, how to trim and fade it, how to stop it on a chosen slide, and a free way to embed a track without opening PowerPoint.
| What you want | What to do |
|---|---|
| Music on one slide only | Insert the song on that slide and set Start: Automatically |
| One song through the whole deck | Insert it on slide 1 and press Play in Background |
| A different song for each section | Insert a song on the first slide of each section and stop each one where the next begins |
| Music that ends on a certain slide | Animation Pane → Effect Options → Stop playing: After N slides |
| No PowerPoint on this computer | Use the free Add Audio to PowerPoint tool in the browser |
- What to do
- Insert the song on that slide and set Start: Automatically
- What to do
- Insert it on slide 1 and press Play in Background
- What to do
- Insert a song on the first slide of each section and stop each one where the next begins
- What to do
- Animation Pane → Effect Options → Stop playing: After N slides
- What to do
- Use the free Add Audio to PowerPoint tool in the browser
Before you start: pick the right music file
- Use MP3 or M4A. Both play in PowerPoint on Windows and on a Mac. WAV works too, but the files are large and make the deck heavy to email.
- Check the length. Music that is shorter than the presentation either stops early or has to loop. Music that is much longer is fine: it ends when the slide show ends.
- Use music you are allowed to use. A song from a streaming app cannot be put into a deck, and a commercial track in a presentation you publish or sell needs a licence. Royalty-free music, or a track you made yourself, avoids the problem.
Add music to one slide
This puts the song on a single slide. It plays while that slide is on screen and stops when you move on.
Open the slide
Select the slide where the music should start.
Insert → Audio → Audio on My PC
On a Mac the item is Insert → Audio → Audio from File. Choose the music file and press Insert. A speaker icon appears on the slide.
Choose how it starts
Select the speaker icon and open the Playback tab. Set Start to Automatically so the music begins when the slide opens, or leave it on In Click Sequence to start it with a click.
Hide the icon
Tick Hide During Show if the music starts automatically. If you start it by clicking the icon, leave it visible.
Test it
Press Slide Show → From Current Slide and listen. The preview button on the icon does not show how the music behaves in a real show.
Where the audio menu is in each version
PowerPoint for Windows
Insert → Audio → Audio on My PC. The Playback tab appears when the speaker icon is selected.
PowerPoint for Mac
Insert → Audio → Audio from File. The playback options are on the Playback tab, as on Windows.
PowerPoint for the web
Insert → Audio, then choose the file from your computer. The web version has fewer playback options, so finish the settings in the desktop app if you can.
Phone or tablet
The mobile apps play music that is already in the deck. Add it on a computer first, then present from the phone.
Play music across all slides
For background music that runs through the whole presentation, put the song on the first slide and tell PowerPoint not to stop it when the slide changes.
Insert the song on slide 1
Use Insert → Audio as above.
Press Play in Background
Select the speaker icon, open the Playback tab and press Play in Background. This one button sets four things: the music starts automatically, plays across slides, loops until stopped and hides the icon during the show.
Or set the options yourself
The same result by hand: Start: Automatically, then tick Play Across Slides, Loop until Stopped and Hide During Show. Leave Loop until Stopped off if the song should play once and end.
Lower the volume
Use Volume on the Playback tab and choose Low if someone will be speaking over the music.
Use a different song for each section
A long presentation often needs more than one track: something upbeat for the opening, something quieter for the main part. PowerPoint has no playlist, so you build one from separate songs.
- Insert the first song on slide 1 and turn on Play Across Slides.
- Open Animations → Animation Pane, right-click the song, choose Effect Options and set Stop playing: After to the number of slides in that section.
- Go to the first slide of the next section and insert the second song the same way.
If you skip step 2, the first song keeps playing under the second one. When each slide should simply have its own short clip, leave Play Across Slides off and insert one file per slide.
Make the slides fit the length of the song
For a photo slideshow or a deck that runs by itself, the slides should end when the music does. Divide the length of the song by the number of slides: a three-minute song over 12 slides is 15 seconds a slide.
Select all the slides, open the Transitions tab, tick After under Advance Slide and enter that time. To set a different time for each slide by feel, use Slide Show → Rehearse Timings and click through the deck while the music plays.
Trim, fade and stop the music
Trim
Playback → Trim Audio lets you drag the start and end markers so only part of the song plays. The file itself is not changed.
Fade in and out
Set Fade In and Fade Out on the Playback tab, in seconds. Two or three seconds is enough to avoid a hard start or cut.
Stop on a chosen slide
Open Animations → Animation Pane, right-click the audio, choose Effect Options and set Stop playing: After to the number of slides the music should cover.
If you would rather prepare the file before it goes into the deck, the free audio trimmer cuts a song to length, add fade to audio puts a fade on both ends, and the audio looper repeats a short track until it is long enough for the whole presentation.
Add music without opening PowerPoint
The free Add Audio to PowerPoint tool embeds the track for you. It works in the browser, so it is handy on a computer without PowerPoint, or when you just want the deck back with music and none of the menus.
Drop in your .pptx
The tool reads the deck and lists its slides.
Add the music file
MP3, WAV, M4A and OGG are accepted. You can add several files at once.
Choose where it plays
One track across the deck puts the song on the first slide and keeps it playing as the slides change. One per slide gives each slide its own file, which suits a different song for each section.
Set the options
Tick Hide the speaker icon to keep the slide clean. In per-slide mode you can also turn autoplay on or off.
Embed and download
Press Embed audio. The new deck downloads automatically with -with-audio added to its name. Open it in PowerPoint and start the slide show to hear it.



Choose music that helps the presentation
Pick instrumental music
Lyrics compete with the words on the slide and with anyone speaking. Save songs with vocals for photo slideshows.
Keep it quiet
Background music should be noticed only when it stops. Set the volume to low and check it on the speakers you will present with.
Match the pace
Slow, steady music suits a report or a lesson. Faster music suits a product launch or a recap video.
Stay with one style
One track, or a few that sound alike, feels deliberate. A new genre on every slide feels like a mistake.
Share a deck that has music in it
Music added with Insert → Audio is stored inside the .pptx, so it travels with the file. A few things to check before you send it:
- File size. The deck grows by about the size of the music file. MP3 and M4A keep it small; WAV is several times larger. On Windows, File → Info → Compress Media shrinks audio that is already in the deck.
- Google Slides. It drops audio that is embedded in a .pptx when it imports the file, so the slides arrive silent. Add the music again inside Google Slides.
- Keynote. It imports the audio, but check the playback settings before you present.
- Video. If the deck will be watched and not presented, export it with File → Export → Create a Video. The music is recorded into the MP4, so it plays everywhere.
Why the music does not play
It stops when the slide changes
Play Across Slides is off. Select the speaker icon and tick it on the Playback tab, or press Play in Background.
It only starts when clicked
Start is set to In Click Sequence or When Clicked On. Change it to Automatically.
It is silent on another computer
The file format may not be supported there, or an old deck links to the song instead of containing it. Use MP3 or M4A and insert the file again so it is saved inside the deck.
It is missing from the exported video
Music set to start on a click is not triggered in a video. Set it to start automatically, then export again with File → Export → Create a Video.
Music and a voice together
Music sets the mood, but it does not explain the slides. If the deck will be watched without you presenting it, add a narration too.
In Notevibes Studio you upload the deck and an AI voice, or a clone of your own voice, reads your speaker notes onto every slide, one clip per slide. How to add voiceover to PowerPoint walks through it step by step, next to the record-it-yourself route. The Studio can also make the music: describe the track you want and download it as a file.
When a voice and music play together, keep the music low and instrumental so the words stay clear.
Put a track on your slides
Drop in a .pptx and a music file, and download the deck with the music embedded.
