Audio to Guitar Tab
Upload a guitar recording or a song and get a draft tab: which string, which fret, in your tuning and with your capo. Play it back, check it by ear, then copy or download it. Free, no sign-up.
Drop a guitar recording or a song
MP3, WAV, M4A, FLAC… up to 500 MB
Make the tab…or click anywhere in this box to browse files
How to Turn Audio Into Guitar Tab
Three steps from a recording to a tab you can play.
Say What You’re Uploading
Pick “Solo guitar recording” for one guitar on its own, or “Song with a band” to pull the guitar out of the mix first. Set your tuning and capo.
Drop Your Audio
MP3, WAV, M4A or FLAC, up to 500 MB. The notes are found on our servers, then the tab is worked out in your browser.
Check It, Then Keep It
Press Play to hear the tab with a cursor moving over it, switch to your recording to compare, then copy the tab or download it as text.
What You Get
A starting tab, a way to check it, and the notes to take with you.
Fingerings a Hand Can Play
Each note gets a string and a fret chosen to keep your hand in one place where it can, with open strings where they fit and no chord shape wider than a hand can reach.
Your Tuning, Your Capo
Standard, Drop D, half step down, D standard, Open G or DADGAD, and a capo from fret 1 to 7. Change either and the tab is redone on the spot, no new upload.
Hear the Tab
Play sounds the tab on a simple plucked-string sound while a cursor moves along it. Switch to your recording to hear where they match and where they don’t.
Pull the Guitar Out of a Song
With “Song with a band”, the guitar is separated from the mix before its notes are read, so bass, drums and vocals get in the way less.
Plain Text You Can Share
The tab is ordinary six-line text. Copy it into a message or a notes app, or download it as a .txt file.
The MIDI Notes Too
The notes the tab was built from come as a MIDI file as well, to open in any music app that reads MIDI.
What Happens to Your Recording
Your file is uploaded over an encrypted connection and its notes are found on our own servers. The file is deleted once your result is delivered. Working out the tab, playback and the downloads all happen in your browser.
Deleted After
Gone once your notes are delivered
No Account
Upload and read the tab
Never Used for Training
Your audio is not shared
Who Uses Audio to Tab
A first draft saves the slowest part of learning by ear.
Learning a Riff
Get a first guess at the frets of a riff you love, then fix it by ear instead of starting from nothing
Writing Down Your Own Ideas
Record a part you just came up with on your phone and keep it as tab before you forget it
Teaching
Turn a recording of an exercise into tab to hand to a student, then tidy it up
Covers
Work out a guitar part from a song as a starting point for your own version
Alternate Tunings
See where a part lies in Drop D, DADGAD or Open G, or with a capo
Practice Notes
Keep a text copy of what you played with your practice log
From a Recording to a Tab You Can Play
Learning a guitar part by ear means finding every note, then finding where to play it. This tool does a rough first pass at both. It listens for the notes in your recording, then picks a string and a fret for each one so the result is something a hand can actually play. What you get is a draft: a place to start, which you check by ear and fix.
What works well, and what doesn’t
A clean recording of one guitar gives the best tab: a riff, a melody, picked arpeggios, or simple strummed chords recorded on their own. Busy parts are harder. Fast strumming, heavy distortion, effects and several guitars at once all blur the notes, so expect extra and missing ones. From a full song, choose “Song with a band”: the guitar is separated first with the same separation as the guitar extractor, and the tab catches the main guitar part roughly. To hear the separated part on its own, or every instrument as its own track, use the stem splitter.
How the frets are chosen
Most notes on a guitar can be played in more than one place. The tool goes through the whole recording and chooses positions that keep your hand from jumping around: it stays in one area of the neck while it can, uses open strings where they fit, puts one note on each string in a chord, and never asks for a stretch wider than a hand can reach. When two choices are equally easy, it takes the lower one. Strummed open chords usually come out as the shapes you already know.
Tuning and capo
Set the tuning you play in, and the tab is worked out for those strings. If you play with a capo, the fret numbers count from the capo, the way capo tabs are usually written. Changing either redoes the tab right away from the same notes. Get in tune first with the guitar tuner, and if a song sits awkwardly for your voice, the transpose calculator shows which capo fret lets you keep the chord shapes.
Reading and checking the tab
Each of the six lines is a string, with the highest string on top. The numbers are frets, and 0 is an open string. The tab has no bar lines: each dash stands for a short slice of time, shown above the tab, so notes that are far apart in the recording are far apart in the tab. Press Play to hear it and watch the cursor, then switch to your recording to compare. Where the two match, the tab is likely right. The notes behind the tab are also available as a MIDI file, or you can get them as a piano roll from audio to MIDI. To know the key before you start fixing notes, use the song key finder.
Do the Rest by Asking
In the Notevibes Studio, Noty separates the guitar from a song, splits the stems or tunes a vocal. You just say what you want.
Free to start · No credit card required
Related Audio Tools
More free AI audio tools from Notevibes — same engine, no sign-up.
Audio to MIDI Converter
Turn a melody or one instrument into MIDI notes.
AI Guitar Extractor
Isolate the guitar from any song.
Guitar Tuner
Tune all six strings with your mic — auto string detection.
Transpose & Capo Calculator
Move chords to a new key or work out a capo position.
Song Key Finder
Find the key, scale, and Camelot code of any song.
AI Stem Splitter
Split any song into vocals, drums, bass, and other.
Audio to Guitar Tab FAQ
How do I turn audio into guitar tab?
Choose “Solo guitar recording” or “Song with a band”, set your tuning and capo, and drop an MP3, WAV, M4A or FLAC file on this page. You get a draft tab you can play back, compare with your recording, copy as text or download.
How accurate is the tab?
Treat it as a draft. A clean recording of one guitar comes out closest. Fast strumming, distortion, effects and full mixes add wrong and missing notes, and a note can sometimes be played in another place than the one chosen. Play the tab back next to your recording and fix what doesn’t match.
Can I get guitar tab from a full song?
Yes. Choose “Song with a band” and the guitar is separated from the mix before its notes are read. It catches the main guitar part roughly; with two guitars or a busy arrangement, expect a sketch rather than an exact tab.
Which tunings are supported?
Standard (E A D G B E), Drop D, half step down, D standard, Open G and DADGAD, plus a capo from fret 1 to 7. Change them after the result comes back and the tab is redone without a new upload.
Does it show rhythm or bar lines?
No. The tab follows the timing of the recording: each dash is a short slice of time, so spacing shows roughly when notes happen, but there are no bar lines or note lengths. Listen to the recording for the rhythm.
How long can the recording be?
Up to 10 minutes of audio and 500 MB per file. A short clip of the part you want to learn is quicker and easier to read.
What can I download?
The tab as a .txt file, or copied as text, and the notes it was built from as a MIDI file.
What happens to my file?
It is processed on our own servers and deleted after your result is delivered. It is never shared and never used to train AI. The tab itself is worked out in your browser.