Online Hearing Test
A quick headphone check of the range of tones you can hear. A tone rises, then falls; press when it fades out and see the highest and lowest frequency you heard, for each ear if you like. Not a medical test.
Use headphones in a quiet room, with your device volume at a moderate level.
A quick check of the range of tones you can hear through your headphones. Results depend on your headphones, device and volume. This is not a hearing test by a professional — if you have any concerns about your hearing, see an audiologist.
How the Frequency Range Check Works
A few minutes, a pair of headphones and a quiet room.
Set a Comfortable Level
Choose both ears or each ear separately. Play the 1,000 Hz reference tone and move the slider until it is clear but comfortable.
Follow Two Sweeps
A tone starts at 2,000 Hz and rises, then another starts at 250 Hz and falls. Press the button the moment each one fades out for you.
Read and Copy the Result
The card shows the highest and lowest frequency you heard, for each ear if you tested them apart. Copy it as text to keep.
What the Check Gives You
Two numbers per ear, measured with your own headphones.
High-Frequency Sweep
A tone glides up from 2,000 Hz towards 20,000 Hz. The frequency shows live, and the moment you press is your top number.
Low-Frequency Sweep
A second tone glides down from 250 Hz towards 20 Hz, so you also see how low your headphones and ears reach together.
Each Ear Separately
Test both ears at once, or the left and right ear one after the other. The result card then shows a line for each.
Gentle by Design
Every tone fades in from silence and the loudest setting is capped well below full scale. You choose the level before any sweep starts.
Copy as Text
One button copies the result in plain words, ready to paste into a note or compare with a later check.
Free, No Sign-Up
No account and no install. It never asks for your microphone; tones go out and you answer with a button.
Just Your Headphones
The check never asks for your microphone. Tones are generated in your browser, you answer with a button, and your result stays on the page until you copy it or close the tab. Nothing is uploaded or stored.
No Microphone
Answers are button presses
No Account
Open the page and start
Nothing Stored
Your result stays on your screen
Why People Run a Range Check
Mostly curiosity, and a little gear testing.
Plain Curiosity
See where the highest tone you can hear actually sits, in numbers
Comparing Headphones
Run the low sweep on two pairs and see which one reaches deeper
Checking Left and Right
Make sure both earcups play and sound alike before a mix or a call
Comparing With Friends
Pass the headphones around and compare the copied results
A Science Class Demo
Show how the range of hearing differs from person to person
Before Mixing Audio
Know the top of your own range before you judge cymbals and hiss
What a Headphone Hearing Test Can and Can’t Tell You
This page plays tones and asks when you stop hearing them. That makes it a useful, quick look at the range of frequencies you can hear through your own headphones. It is not a hearing test by a professional, and it is worth knowing why before you read anything into your numbers.
What the sweeps measure
The high sweep starts at 2,000 Hz and rises; the low sweep starts at 250 Hz and falls. Your result is the frequency playing when you pressed the button. Press as soon as the tone fades, not after you are sure it is gone, because a slow press pushes the number further along the sweep. If the sweep reaches its end before you press, the card says so.
Why your headphones matter
Many headphones and phone speakers can’t play very high or very low tones, so the sound may run out before your ears do. Your device, its settings and the volume you chose all change the numbers too. A different pair of headphones can give a different result, and that is the equipment talking. The spectrum analyzer and mic test are handy if you want to look at your audio gear more closely.
This is not a medical test
An audiologist checks your hearing with calibrated equipment, in a quiet booth, at many frequencies and levels. This page does none of that, and it can’t tell you whether your hearing is normal. If you notice changes in your hearing, ringing in your ears, or have any concerns, please see an audiologist or a doctor.
Keep the volume moderate
Start with your device volume at a moderate level and set the slider so the reference tone is clearly audible but comfortable. Never turn up the volume to chase a tone you can’t hear. If anything feels uncomfortable, stop and take the headphones off.
More ways to use your ears
Play any single frequency with the tone generator, or a steady background sound with the white noise generator. For listening skills you can train, try the interval ear training game or see whether you can name notes cold with the perfect pitch test.
Checked Your Range? Now Make Something
The full Notevibes Online Audio Editor records, trims, mixes tracks, adjusts EQ and exports to MP3 or WAV, all in your browser.
Free to try · No credit card required
Related Audio Tools
More free AI audio tools from Notevibes — same engine, no sign-up.
Tone Generator
Play a pure tone at any frequency.
White Noise Generator
Play white, pink, or brown noise for as long as you like.
Perfect Pitch Test
Hear a note with no reference — can you name it?
Ear Training
Interval recognition game — name the distance between notes.
Mic Test
Check that your microphone works and hear it back.
Spectrum Analyzer
See the frequencies in a file or your mic, live.
Online Hearing Test FAQ
How does the online hearing test work?
You set a comfortable level with a 1,000 Hz reference tone, then follow two sweeps: one rising from 2,000 Hz and one falling from 250 Hz. Press the button when each tone fades out. The card shows the highest and lowest frequency you heard.
Is this a real hearing test?
No. It is a quick headphone check of the range of tones you can hear, and the result depends on your headphones, device and volume. It can’t diagnose anything. If you have concerns about your hearing, see an audiologist.
Do I need headphones?
They are strongly recommended, and you need them to test each ear separately. Laptop and phone speakers often can’t play very high or very low tones, which would cut your range short.
Why is my result different on another device?
Every pair of headphones and every device plays the extremes differently, and the volume you set matters too. Compare results only when you use the same headphones, device and level.
What does “end of sweep” mean?
You were still hearing the tone when the sweep finished, so your range goes at least that far with this setup. The result shows the sweep’s end frequency with “or higher” or “or lower”.
How loud should the tones be?
Clearly audible but comfortable. Keep your device at a moderate volume, set the slider with the reference tone, and don’t raise the volume during a sweep. The output is capped and every tone fades in from silence.
Can I save my result?
Press Copy result to copy it as text, then paste it wherever you like. Nothing is stored on our side.