notevibes. Free Online Spectrum Analyzer

Spectrum Analyzer Online

See which frequencies are in your sound, as it plays. Drop in an audio file or switch on your microphone, and the spectrum moves live from deep bass to the highest treble, with the strongest frequency named above it.

Everything runs locally in your browser — your audio is never uploaded.
Live spectrum
File or microphone
Peak frequency
Nothing uploaded
How it works

How to Use the Spectrum Analyzer

No account and no install. Pick a source and press play.

1

Pick a Source

Choose Audio file and drop in an MP3, WAV, M4A, FLAC, OGG or AAC up to 200 MB, or choose Microphone and allow mic access.

2

Play or Start Listening

Press Play for a file, or start the microphone. The spectrum starts moving straight away.

3

Read the Spectrum

Low frequencies sit on the left, high ones on the right, and taller means louder. The peak frequency above the graph names the strongest one right now. Pause a file to freeze the picture.

Why Notevibes

What You See in the Analyzer

A clear, live picture of where the energy in your audio sits.

A Log Frequency Axis

The axis runs from 20 Hz to 20 kHz on a log scale with labelled ticks, so each octave gets the same room and the bass isn’t squeezed into a corner.

Levels in Decibels

Height is shown in dB relative to full scale, from 0 at the top down to −100, with gridlines every 20 dB.

The Peak Frequency, Named

The analyzer finds the strongest frequency in the current frame and shows it in Hz or kHz, so a hum, a whistle or a ringing note gets a number.

Your Own Files

Drop in a song, a voice recording or a sound effect and watch its spectrum as it plays through your speakers or headphones.

Live From the Mic

Switch to the microphone to see your voice, an instrument or the noise in a room. The mic is read without the browser’s voice processing, and it is never played back through the speakers.

Private by Design

The analysis runs on your device. Files and microphone sound are never uploaded, recorded or stored.

Your Audio Stays on Your Device

Files are played and analyzed in your browser, and the microphone is read frame by frame and thrown away. Nothing is uploaded, recorded or kept.

No Upload

The analysis runs in your browser

No Recording

Mic frames are analyzed and discarded

No Account

Pick a source and start

Made for

What People Use a Spectrum Analyzer For

Anywhere you want to see a sound, not just hear it.

Planning an EQ

Spot a boomy low end or a harsh high band before you reach for the equalizer

Finding a Hum or Whine

Read the peak frequency of a steady hum, buzz or whine so you know exactly where it is

Comparing Mixes

See how the energy is spread in your track next to one you like the sound of

Checking a Microphone

Watch what your mic picks up and how much room noise sits under your voice

Learning About Sound

See harmonics, overtones and the difference between a pure tone and a voice

Checking High Frequencies

See whether a file really carries treble or was cut off high up by lossy encoding

See the Frequencies in Any Sound

A waveform tells you when a sound is loud. A spectrum tells you where its energy sits, from the low rumble of a bass to the air at the top of a vocal. That is the view you need when a mix sounds muddy, a recording hums, or you just want to know what a sound is made of. This analyzer draws that picture live, from a file you play or straight from your microphone.

How to read the graph

Frequency runs from left to right on a log scale, so 20 to 200 Hz takes as much room as 2 to 20 kHz, the way we hear pitch. Height is level in dB relative to full scale: the higher the curve at a point, the more energy at that frequency. Bass and kick drums live on the left, voices in the middle, cymbals and breath on the right. A single tall spike usually means a pure tone, a hum or a ringing resonance, and the peak frequency readout gives you its number.

File or microphone

With a file, you hear it while you watch it, and pausing freezes the last picture so you can look closely. With the microphone, the browser’s echo cancellation and noise suppression are turned off for the analysis, so you see the sound the mic actually picks up. If you only want to check that your mic works and hear yourself back, the mic test is quicker. To play a pure frequency and watch it here, use the tone generator.

From seeing a problem to fixing it

Once you know where the trouble is, the audio equalizer can cut or boost that range. If you want to paint out a noise you can see, the spectral editor shows a whole file as a picture you can edit. For loudness rather than tone, the LUFS meter measures how loud a file is overall, and the pitch detector tells you which note a voice or instrument is playing.

A guide, not a lab instrument

The analyzer uses your browser’s built-in audio analysis, so what you see is a fast, live overview with some smoothing between frames. It is ideal for spotting where the energy sits and naming a strong frequency. For a precise measurement of a very low note, play it for a while and watch the readout settle.

Found the Problem? Fix It in the Editor

The full Notevibes Online Audio Editor has EQ, noise cleanup, effects and multitrack mixing, and exports to MP3 or WAV, all in your browser.

Free to try · No credit card required

Keep going

Related Audio Tools

More free AI audio tools from Notevibes — same engine, no sign-up.

FAQ

Spectrum Analyzer FAQ

What is a spectrum analyzer?

It shows how much energy a sound has at each frequency. Instead of the up-and-down of a waveform, you see bass on the left, treble on the right, and how strong each part is.

Can I analyze an audio file?

Yes. Choose Audio file, drop in an MP3, WAV, M4A, FLAC, OGG or AAC file up to 200 MB, and press Play. The spectrum moves as the file plays, and Pause freezes it.

Can I use my microphone?

Yes. Choose Microphone, press Start the microphone and allow access. The spectrum of whatever the mic hears is drawn live. The mic sound is never played through your speakers, so there is no feedback.

What frequency range does it show?

From 20 Hz to 20 kHz on a logarithmic axis, which covers the range of human hearing. If your device runs at a lower sample rate, the top of the axis stops at half that rate.

What is the peak frequency?

It is the strongest frequency in the current frame, shown in Hz or kHz. When nothing stands out above the noise, it shows a dash instead of a number.

What do the dB values mean?

They are decibels relative to digital full scale. 0 dB at the top is the loudest a digital signal can be, and the gridlines step down every 20 dB to −100.

Is my audio uploaded?

No. Files are played and analyzed in your browser, and microphone sound is analyzed frame by frame and discarded. Nothing is uploaded, recorded or stored.

Is the spectrum analyzer free?

Yes. There is no sign-up and no account. It runs in your browser on desktop or phone.