notevibes. Free Online Mic Test

Mic Test Online

Is your microphone working? Press the button, talk, and watch the level meter and waveform move. Pick a different mic if you have more than one, then record five seconds and play it back to hear exactly what others hear.

Microphone check

Your browser will ask for microphone access. The sound is checked on your device and never uploaded.

Everything runs locally in your browser — your voice is never uploaded.
Live level meter
Live waveform
Hear yourself back
Nothing uploaded
How it works

How to Test Your Microphone

No account and nothing to install. It takes a few seconds.

1

Press Test My Microphone

Your browser asks for permission to use the mic. Allow it, and the meter and waveform start moving as soon as there is sound.

2

Talk and Watch the Level

Speak at your normal volume. The meter shows the level in dBFS with a short peak hold, and a line above it tells you whether the signal is missing, quiet, fine or too loud.

3

Record and Play It Back

Press Record 5 seconds, say something, then press Play it back. Use headphones if you can, so the playback doesn’t leak back into the mic.

Why Notevibes

What the Mic Test Shows You

Enough to know your mic works before a call or a recording.

A Real Level Meter

The bar runs from −60 to 0 dBFS, with a marker that holds the recent peak. You can see at a glance whether the mic is picking you up and whether it is close to the top.

A Live Waveform

The wave of whatever the mic hears is drawn as it happens. Tap the mic or snap your fingers and you’ll see it straight away.

Choose Which Mic

Laptop mic, headset or USB microphone: pick the one you want from the list and the test switches to it, so you can check each one.

Hear What Others Hear

A five-second recording played back is the quickest way to catch hiss, echo, a muffled sound or a mic that is too far away.

Clear Answers When It Fails

If access is blocked, no mic is found, or another app is holding the mic, the page tells you which one it is and what to try next.

Stays in Your Browser

The sound is measured on your device and the short clip is kept only in this tab. Nothing is sent anywhere, and Stop switches the mic off.

Your Voice Stays on Your Device

The meter and waveform read the microphone on your own device. The five-second test clip lives only in this tab and is gone when you leave the page. Nothing is uploaded, stored or shared.

No Upload

The test runs in your browser

No Account

Press the button and talk

You’re in Control

Stop turns the mic off

Made for

When to Run a Mic Test

A few seconds now saves a “can you hear me?” later.

Before a Video Call

Make sure the right mic is picked and the level moves before the meeting starts

Before Recording a Podcast

Check the level and listen back for hiss or room echo before you record a whole episode

New Headset or USB Mic

Confirm a new microphone works in your browser and sounds the way you expected

Gaming and Streaming

Check your headset mic before you go live so your team and viewers can hear you

Online Classes and Exams

Make sure the mic is allowed in the browser before a class or a proctored test

Tracking Down a Problem

Find out whether the problem is the mic, a blocked permission, or another app holding it

Check Your Microphone Before Anyone Else Has To

Most mic problems turn out to be one of a few things: the browser was never allowed to use it, the wrong device is selected, another app is holding it, or it works but sounds too quiet or too harsh. This page checks all of those in one place. You see the signal move, you choose the device, and you hear a short recording of yourself, all without installing anything.

Reading the level meter

The meter shows the level in dBFS, decibels below the loudest value a digital signal can hold. 0 is the top. When you talk at a normal distance, the bar should move well into the middle of the scale. If it barely moves, move closer or raise the input level in your system settings. If the peak marker keeps hitting the right-hand end, the sound is clipping and will distort, so back off or turn the input down.

Hearing yourself back

The meter tells you that there is signal. The playback tells you what it sounds like. Record five seconds, play it back with headphones, and listen for hiss, hum, room echo or a muffled tone. For a longer take you can trim and download, use the voice recorder. If the clip has steady background noise, the noise remover can take it down, and the audio enhancer can clean up a voice recording in one go.

When the mic doesn’t show up

If the page says access was blocked, open the site permissions next to the address bar and allow the microphone, then check your computer’s privacy settings too. If it says no microphone was found, the device is unplugged, switched off or disabled in the system. If the mic is found but can’t be opened, another app such as a video-call program is probably using it; close that app and try again.

Going further with your mic

Want to see what the mic picks up across the frequency range? The spectrum analyzer draws it live. To check how loud a finished recording is in LUFS, drop it into the LUFS meter. And if you’re testing the mic for singing, the pitch detector shows the note you’re hitting.

Mic Sounds Good? Put It to Work

The full Notevibes Online Audio Editor records, trims, cleans up noise, mixes several tracks and exports to MP3 or WAV, all in your browser.

Free to try · No credit card required

Keep going

Related Audio Tools

More free AI audio tools from Notevibes — same engine, no sign-up.

FAQ

Mic Test FAQ

How do I test my microphone online?

Press Test my microphone and allow access when the browser asks. Talk, and the level meter and waveform move if the mic is working. Then press Record 5 seconds and Play it back to hear how you sound.

Why does the page say microphone access was blocked?

The browser, or your computer, has been told not to let this site use the mic. Click the site settings icon next to the address bar, allow the microphone, and check the microphone privacy settings in your operating system. Then press Try again.

The meter isn’t moving. What’s wrong?

Check that the right microphone is selected in the list, that it isn’t muted by a hardware switch or in your system sound settings, and that its input level isn’t turned all the way down. Then speak close to it.

What level should my mic show?

When you talk normally, the bar should move clearly into the middle of the scale without the peak marker reaching 0 dBFS. The line above the meter tells you if the signal is missing, quiet, fine, or so loud that it may distort.

Can I choose which microphone to test?

Yes. Pick it from the Microphone list and the test switches to it. Device names appear once you have allowed mic access.

Why should I use headphones for the playback?

If the clip plays through speakers while the mic is still open, the mic picks the playback up again. Headphones keep the test clean and let you hear details like hiss and room echo.

Is my recording uploaded or saved?

No. The level is measured on your device and the five-second clip stays in this browser tab only. It is gone when you record again or leave the page.

Does the mic test work on phones?

It works in current mobile browsers that allow microphone access over HTTPS. Allow the mic when asked, then talk and watch the meter.